Hammond SKX, Owner'S Manual

Page: 95 / 156

95
Setting the Parameters
Frequency
Level
Mix
Rate
HPF
effect range
Modulation
Depth
❻
FLANGER - RATE
Adjusts the modulation speed. It is linked with the [EFFECT AMOUNT] knob on
the top panel.
Th
e setting range is 0 to 127. Th e cycle becomes faster as the value increases.
❼
FLANGER - DEPTH
Adjusts the depth of modulation.
Th
e setting range is 0 to 127. Th e modulation becomes deeper as the value increases.
❽
FLANGER - RESONANCE
Adjusts the amount of resonance (feed-back).
Th
e setting range is 0 to 127. Th e resonance becomes greater as the value increases.
At higher values, the sound is modulated beyond normal recognition.
❾
FLANGER - DELAY
Controls the delay of the eff ect sound.
Th
e setting range is 0 to 127. Th e delay increases as the value is increased.
❿
FLANGER - MIX
Adjusts the volume balance between the “dry” and the eff ect sound.
Th
e setting range is 0 to 127. At 0, only the “dry” is heard. Th e eff ect level becomes
greater as the value is increased. At 127 the ratio between the “dry” and the eff ect
sounds becomes 1:1.
⓫ FLANGER - HPF
Controls the frequency range of the eff ect.
Th
e setting range is 0 to 127. At 0 the eff ect is added to all frequencies. Th e eff ect is
added to the higher frequencies as the value increases.
Flanger
Th is is the sweeping “Jet Airplane” sound adjustable from a mild shimmer to a deep
“swoosh”.
❾ ❾ ❺ ❺ ❻ ❻ ❼ ❼ ❽ ❽ ❿ ❿ ⓫ ⓫