Hammond SKX, Owner'S Manual

Page: 124 / 156


Skx
Owner’s Manual
124
LOADING A CUSTOM TONE
WHEEL
Locate the Custom Number mode with refer to the illustration
of top of previous page.
Select the Custom Tone Wheel fi le to load with the [

],[

]
buttons or the [VALUE] knob, and press [ENTER].
NOTE: If you do this operation, a Patch in the SKX are replaced with
the newly loaded Patch. You should save important data be-
forehand (p. 123).
Select the Custom number to be replaced.
Press the [ENTER] button. Th
e Custom Tone Wheel is loaded.
Th e Tone Wheel set name is shorted in this page. Please refer
below for detail.
B1: B-Type 1
B2: B-Type 2
Ml: Mellow
DELETING A CUSTOM TONE
WHEEL
Select the Custom Tone Wheel fi le to delete with the [

],[

]
buttons or the [VALUE] knob.
Press [

] button once. “
[ENT] to Delete
” is displayed.
Press the [ENTER] button. “
Delete?
” is displayed. Now
press the [ENTER] button again. Th e Tone Wheel fi le is de-
leted.
NOTE: If you do not with to delete the Custom Tone Wheel, touch the
[MENU/EXIT] button.
To locate the Custom Number mode, please refer to the illus-
tration of top of previous page.
①
INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
②
LOCATE THE CUSTOM NUMBER MODE
③
SELECT THE TONE WHEEL FILE
④
SELECT THE DESTINATION
①
INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
②
LOCATE THE CUSTOM NUMBER MODE
③
SELECT THE TONE WHEEL FILE
④
SELECT THE OPERATION
⑤
PRESS [ENTER] TO DECIDE