Hammond SKX, Owner'S Manual

Page: 120 / 156


Skx
Owner’s Manual
120
LOADING THE SETUP
Locate the SETUP mode. A Setup fi le will displayed.
Select the Setup fi le to load with the [

],[

] buttons or the
[VALUE] knob.
NOTE: If you do this operation, the settings in the SKX are replaced
with the newly loaded setups. You should save important
data beforehand (p. 118).
Press the [ENTER] button. Th e Setup is loaded.
In case of the WHOLE fi le, loading can take up to a maximum
30 minutes.
DELETING THE SETUP
Select the setup fi le to delete with the [

],[

] buttons or the
[VALUE] knob.
Press [

] button twice. “
[ENT] to Delete
” is displayed.
Press the [ENTER] button. “
Delete?
” is displayed. Now
press the [ENTER] button again. Th e setup is deleted.
NOTE: If you do not with to delete the setup, touch the [MENU/EXIT]
button.
①
INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
②
LOCATE THE SETUP MODE
③
SELECT THE SETUP FILE
④
PRESS [ENTER] TO DECIDE
①
INSERT THE USB FLASH DRIVE
Make sure that the USB Flash drive is correctly inserted.
Locate the SETUP mode. A Setup fi le will displayed.
②
LOCATE THE SETUP MODE
③
SELECT THE SETUP FILE
④
SELECT THE OPERATION
⑤
PRESS [ENTER] TO DECIDE