2.0 AMP PALM SANDER 15
TROUBLESHOOTING
Suspected malfunctions are often due to causes that the users can fix themselves.
Therefore, check the product using this section. In most cases the problem can be solved
quickly.
WARNING:
Only perform the steps described within these instructions! All further
inspection, maintenance and repair work must be performed by an authorised service
centre or a similarly qualified specialist if you cannot solve the problem yourself!
PROBLEM
POSSIBLE CAUSE
CORRECTIVE ACTION
Product does not start.
Not connected to power supply. Connect to power supply.
Power cord or plug is defective.
Have the tool serviced by an
Authorized Service Center.
Other electrical defect to the
product.
Have the tool serviced by an
Authorized Service Center.
Product does not
reach full power.
Extension cord not suitable for
operation with this product
Use a proper extension cord
Power source (e.g. generator)
has too low voltage
Connect to another power
source
Air vents are blocked.
Clean the air vents
Unsatisfactory result
Sanding paper is worn
Replace with a new one
Sanding paper not suitable for
workpiece material.
Use proper Sanding paper.
Sanding sheet not suitable for
work piece material.
Use suitable sanding sheet.
