Hammer RH 12, Instruction Manual

Page: 17 / 34

GREASING
EVERY 8 HOURS OF OPERATION, GREASE POINTS B WITH 4-5 SQUEEZES OF THE GREASE GUN. MOVE
AWAY FROM THE EQUIPMENT, USE THE EXCAVATOR OPENING AND CLOSING CONTROLS TO CLOSE AND
OPEN THE JAWS 3-4 TIMES, THEN GREASE AGAIN.
EVERY 40 HOURS OF OPERATION, GREASE THE ROTATION MOVEMENT AT POINT A . SQUEEZE THE
GREASE GUN 3/4 TIMES. MOVE AWAY FROM THE EQUIPMENT AND USE THE EXCAVATOR CONTROLS TO
ROTATE IT FOR 10 SECONDS, THEN GREASE AGAIN.
EVERY 40 HOURS OF OPERATION, GREASE THE ROTATION MOVEMENT AT POINT C . SQUEEZE THE
GREASE GUN 3-4 TIMES. MOVE AWAY FROM THE EQUIPMENT AND USE THE EXCAVATOR CONTROLS TO
ROTATE IT FOR 10 SECONDS, THEN GREASE AGAIN.
WARNING: MORE FREQUENT LUBRICATION IS RECOMMENDED IN THE TROPICS AND IN ENVIRONMENTS
THAT ARE VERY HUMID, DUSTY, OR WITH SIGNIFICANT LEVELS OF IMPURITIES OR EXTREME
TEMPERATURE FLUCTUATIONS.
17