Hammer RH 12, Instruction Manual

Page: 10 / 34

Before the operation
Warn all others in the area that you are about to start operation.
Check underneath and around the machine for obstructions. Make sure that all personnel and equipment are
clear form the area of operation.
Check clearances in all directions, including overhead.
Be properly seated in the operator’s seat.
Operating personnel in the work area MUST ALWAYS wear suitable clothing such as:
- Protective footwear
- Suitable work coveralls
- Protective gloves
- Hearing protection
- Hard hat
- Safety glasses
•
Personnel must not eat or drink in works areas.
•
Personnel must not smoke cigarettes in work areas.
•
Personnel must not operate machinery under the influence of drugs or alcohol.
Do not wear loose clothing or jewelry that could get caught on the machinery and cause injury.
Keep hands, feet, hair and clothing away from moving parts.
Keep hands and feet within the operator’s platform.
Know the pinch and crushing points as well as all rotating components and avoid them during operation.
Always know where to get assistance in case of an emergency. Know where to locate and how to use safety
equipment, such as a first aid kit and fire extinguisher.
Report all injuries to your supervisor or as directed.
Before performing any of the activities listed in the
“Responsibilities” section, make sure that:
- There are no unusual or potentially hazardous condition and that no unauthorized personnel are present in
the work area.
- There are no materials in the work area that may obstruct or impede visibility.
- All protection systems are correctly install and operational.
- Make sure that the ambient and working temperatures do not exceed the permitted limits of -16°C to +45°C
(3°F to 113°F). If working in temperatures below 3°F (-16°C) it is very important to operate the shear
without cutting material to increase internal temperature. To ensure the hydraulic oil reaches normal working
temperature, open and close the jaw 10 times slowly.
10