© 2018 mPTech. All rights reserved. Hammer Iron 2 - EN
20
5. Package content
HAMMER IRON 2 phone
2400 mAh capacity battery
The wired headset
Charger (a USB cable)
The key to open the battery cover
User manual
Warranty card
If any of the above items is missing or damaged, please contact your dealer.
We advise to keep the container in case of any complaints. Keep the container out
of reach of children.
Dispose of container in accordance with local regulations when it is no longer
needed.
6. Before the first start
6.1 Mounting the SIM card
The device is a cellular phone made in Dual SIM technology allowing the use of
two mobile networks simultaneously. You can use up to 2 SIM cards
simultaneously. Turn off the smart phone to insert the SIM card(s) correctly.
Subsequently unscrew 2 screws of the battery cover, remove it gently taking
care not to damage elements of the device.
Take the battery out. Insert the SIM
card/s into the slot in accordance with the pictures placed next to the slot/s.
Gently replace the cover, taking care not to damage elements of the rubber
sealing and tighten back the screws.
6.2 Installation of the memory card
The phone memory can be expanded with memory cards. Photos, videos, music
files etc. and such can be stored on memory cards.
Use only memory cards recommended by the manufacturer. Pay attention to the
selection of the proper format (in this model - the microSD card), capacity and
type/class. Incompatible memory cards may damage the device and cause the stored
data to be destroyed as well. Incompatibility of memory card can be caused, among
others, by an incorrect card format (required format microSD) or an unsupported card
capacity - above the value recommended by the manufacturer
.
Turn off the phone to insert the memory card correctly. Subsequently unscrew
2 screws of the battery cover, remove it gently taking care not to damage
elements of the device.
Take the battery out. Insert the memory card into the
slot in accordance to the picture situated there. Gently replace the cover, taking
care not to damage elements of the rubber sealing and tighten back the screws.
