Hammer A3-26, User Manual

Page: 24 / 72

24
!
"
$
#
/
%
&
(
)
BL
BM
BN
Planer-Thicknesser
A3-26 / A3-31 / A3-41
5.5 Operation and display elements
!
Gear lever
• Position O: (pull out)
Surface planing, Jointing, Bevelling/Tapering,
mortising and idle machine for a longer period of
time
• Position I: Thickness planing
"
System handwheel
Adjusting the height on the thicknessing unit (Thick-
ness planing height)
#
Eccentric (Surface planing)
Adjusting the height of the receiver side of the planer
table
$
Single-hand clamping lever
Clamping the outfeed-side of the planer table
%
Green push button
Switching on the machine
&
Red push button
Emergency stop and switching off the machine
/
Scale (Thickness planing)
Specifying the thicknessing height
(
Single-hand clamping lever
Clamping the planer table
)
Scale (Surface planing)
Specifying the chip thickness on the feeder-side of
the planer table
BL
Single-hand clamping lever
Clamping the infeed-side of the planer table
BM
Adjustment handle (Surface planing)
Adjusting the height of the feeder-side of the planer
table
BN
Main switch (if available)
• Position 0: Mains voltage off
• Position I: Mains voltage on
Fig. 5-15: Operation and display elements
Fig. 5-16: Operation and display elements
Assembly