MTS ROW Assembly Instructions
13
7.
Bolt the left arm to the frame.
Slide the left arm up into the top of the MTS ROW with the
arm facing inward as shown at left. Insert two ½” x 2-3/4” bolts on the outside of the arm
through the bushing and tighten. Insert two ½” x 2-3/4” bolts through the inside bushing and
tighten. All bolts should be inserted through the top piece. Nuts and star washers should be
on the bushings as shown in the detail view in the figure.
NOTE: MAKE SURE THE HANDLE IS FACING INWARD AS SHOWN
IN THE FIGURE BELOW.
1/2” x 2-3/4”
(4)
Arm detail
2-3/4” BOLT
Assembly Figure 7. Bolt left arm to frame.
