(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 4: Configuration
46
ADSL
Connect Mode:
The default is Multimode; it will detect the ADSL line code, G.dmt, G.lite,
and T1.413 automatically. But in some area, it cannot detect the ADSL line code well. At this
time, please adjust the ADSL line code to G.dmt or T1.413 first. If it still fails, please try the
other values such as ALCTL, ADI, etc.
Activate Line:
Aborting (false) your ADSL line and making it active (true) again for taking
effect with setting of
Connect Mode
.
Coding Gain:
Configure the ADSL coding gain from 0 dB to 7dB, or automatic.
Tx Attenuation:
Setting ADSL transmission gain, the value is between 0~12.
DSP FirmwareVersion:
Current ADSL line code firmware version.
Connected:
Display current ADSL line sync status.
Operational Mode:
Display current ADSL mode standard (Operational Mode) your Router is
using when ADSL line has sync.
Annex Type:
ADSL Annex A, which works over a standard telephone line. Annex B, which
works over an ISDN line.
Upstream:
Display current upstream rate of your ADSL line.
Downstream:
Display current downstream rate of your ADSL line.
