(Wireless) ADSL VPN Firewall Router with 3DES Accelerator
Chapter 4: Configuration
74
Configure a new VPN Connection
Connection Name:
A user-defined name for the connection (e.g. “connection to office”).
Local:
Local Network:
Set the IP address, subnet or address range of the local network.
Single Address:
The IP address of the local host.
Subnet:
The subnet of the local network. For example, IP: 192.168.1.0 with netmask
255.255.255.0 specifies one class C subnet starting from 192.168.1.1 (i.e. 192.168.1.1
through to 192.168.1.254).
IP Range:
The IP address range of the local network. For example, IP: 192.168.1.1, end
IP: 192.168.1.10
Remote:
Secure Gateway Address (or hostname):
The IP address or hostname of the remote VPN
device that is connected and establishes a VPN tunnel.
Network:
Set the IP address, subnet or address range of the remote network.
Proposal:
Proposal:
Select the IPSec security method. There are two methods of checking the
authentication information, AH (authentication header) and ESP (Encapsulating Security
Payload). Use ESP for greater security so that data will be encrypted and authenticated.
Using AH data will be authenticated but not encrypted.
