Hamlet HBCS2D100US, User Manual

Page: 28 / 58

7 Data editing
In practice, sometimes we need to edit the data after reading and then output, to facilitate data
differentiation and processing.
Data editing includes:
l Increase Prefix
l Increase Suffix
l Decoding information Data section interception
l Output barcode type CodeID
l Decoding failed to output specific RF
l Increase the terminal Tail
The processed data default output sequence is as follows:
[Prefix] [CodeID] [Data] [Suffix] [Tail]
7.1 Prefix
Increase the Prefix
The prefix is a string that is customized and modified by the user before decoding information. It can be
added by scanning the "Add prefix" setting code.
Allow to increase prefix Not allow to increase prefix
Modify the prefix
Scan "modify prefix" setting code, and combine scan data setting code, users can modify the prefix content,
use two hexadecimal values for each prefix character, the prefix allows up to 15 characters, hexadecimal
conversion table of character value Please refer to Appendix D. Scan "modify prefix" setting code, and combine
scan data setting code, users can modify the prefix content, use two hexadecimal values for each prefix
character, the prefix allows up to 15 characters, hexadecimal conversion table of character value Please refer
to Appendix D.
Modify the code
Example: Modify user-defined prefix "DATA"
1. Check the character table to get "DATA" four characters hexadecimal value: "44", "41", "54", "41"
2. Check whether the setting code is on. If it is not on, please scan the setting code "On" (see section 1.5.2)
3. Scan the "Modify prefix" setting code
4. Scan the data setting codes "4", "4", "4", "1", "5", "4", "4", "1"
5. Scan "Save" setting code