Hamilton Beach HVC406-CE, Operation Manual

Page: 4 / 148

4
Control Panel
ON (I)/OFF ( )
Turns the unit
on and off.
FUNCTION SELECT
Selects VACUUM,
GAS, SEAL, or
SOFTAIR.
DISPLAY
Shows active
function during
program cycle or
set value when
idle. Shows
remaining time
for each step
in the process,
error codes, or
maintenance
reminders.
VACUUM INDICATOR
Indicates vacuum mode
is selected or activated.
GAS INDICATOR
Indicates gas mode is
selected or activated.
SEAL INDICATOR
Indicates sealing mode is
selected or activated.
SOFTAIR INDICATOR
Indicates soft air is
selected or activated.
+/STOP VAC
During cycle,
stops vacuum
process and
continues to next
process. Increases
time when
programming.
–/STOP
During cycle,
interrupts
process and ends
cycle. Decreases
time when
programming.
OIL PREHEAT
FUNCTION
Initiates preheating
function.
VACUUM GAUGE
Indicates the vacuum
pressure in the
vacuumed chamber.
PROGRAM DISPLAY
Indicates program
number.
PROGRAM SELECT
Scrolls between
programs.
REPROGRAM
KEY
Activates
program
setting
changes.
The complete CE declaration of conformity documentation for this appliance is available in the
Technical Support section of our website www.hamiltonbeachcommercial.com.
Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective
collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in
order to reduce any impact on the environment. The user is responsible for returning the product to
the appropriate collection facility, as specified by your local code. For additional information regarding
applicable local laws, please contact the municipal facility and/or local distributor.