Hamilton Beach HBFW3205, Owner'S Manual, Page: 39 / 88

38
11. AUTOMATIC FAULT WARNINGS AND WHAT TO DO
Your Washing Machine is equipped with a built-in fault detection system, indicated by a
combination of flashing wash operation lights. The most common failure codes are shown
below.
TROUBLE CODE POSSIBLE FAULT WHAT TO DO
E01
The door of your machine is not
shut properly.
Shut the door properly until you hear a click. If your
machine persists to indicate fault, turn off your
machine, unplug it and contact the nearest authorised
service agent immediately.
E02
The water pressure or the water
level inside the machine may
be low.
Check the tap is fully turned on. Mains water may be
cut-off. If the problem still continues, your machine will
stop after a while automatically. Unplug the machine,
turn off your tap and contact the nearest authorised
service agent.
E03
The pump is faulty or pump
filter is clogged or electrical
connection of the pump is faulty.
Clean the pump filter. If the problem persists, contact
the nearest authorised service agent. (*)
E04
Your machine has excessive
amount of water.
Your machine will discharge water by itself. Once the
water has drained, turn off your machine and unplug
it. Turn off the tap and contact the nearest authorised
service agent.
(*) See the chapter regarding maintenance and cleaning of your machine.