Hamilton Beach HBFW3205, Owner'S Manual, Page: 15 / 88

14
4. INSTALLATION
Before operating the washing machine, remove the 4 transit bolts and rubber
spacers from the rear of the machine. If the bolts are not removed they may cause
heavy vibration, noise and malfunction of the machine and cause the guarantee to
be void.
4.1 Removing the Transit Bolts
1. Before operating the washing machine, remove the 4 transit bolts and rubber spacers
from the rear of the machine. If the bolts are not removed, they may cause heavy
vibration, noise and malfunction of the machine and void the warranty.
2. Loosen the transit bolts by turning them anticlockwise with an appropriate spanner.
3.
Remove the transit bolts with a straight pull.
4. Fit the plastic blanking caps supplied in the accessories bag into the gaps left by the
removal of the transit bolts. The transit bolts should be stored for future use.
NOTE:
Remove the transit bolts before using the machine for the first time. Faults
occurring due to the machine being operated with transit bolts fitted are out of the scope of
the warranty.
4.2 Adjusting the Feet / Adjusting Adjustable Stays
1 2 3
X
4
X
X
4
4
X
4
1 2 3 4