EN - 24
4.7.3. Selection Stand By
“After 15 minutes without user action in
selection mode, machine goes to energy-
saving mode due to decrease energy
consumption. No led activation on display.
When we changed the knob position in
energy-saving mode the jog dial led should
be fix on in every knob change and nothing
is shown in display.
To restart the machine it will be necessary
to move selector to OFF and select again
the program.
“
During the Program
If you open the door when the program is
running, the product will switch to standby
mode. Once the door has been closed,
press the Start/Pause key to resume the
program.
Do not open the loading door when the
program is running. If you have to open the
door, do not keep it open for a long time.
Program End
Once the program is over, the warning
LEDs for Start/Pause, water tank level, filter
cleaning and condenser cleaning will turn
on. Additionally, an audible warning will be
given at the end of the program. You can
remove the laundry to make the machine
ready for a new load.
IMPORTANT:
Clean the lint filter after
every program. Empty the water tank after
every program.
IMPORTANT:
If you do not take out the
laundry after the program has ended, the
1-hour Anti Crease phase will automatically
be activated. This program rotates the drum
at regular intervals to prevent creases.
4.8. Drum Light Information
• This product includes LED Drum Light.
The light works automatically when you
open the door. And closes itself after awhile
automatically.
• It is not an adjustable option for user to
open or close it.
• Please do not try to replace or modify the
LED Light.
