Technical Data Sheet
PROPRIETARY RIGHTS NOTICE This document and all information contained within it is the property of Hamilton Beach Brands, Inc. (HBB). It is confidential and proprietary
and has been provided to you for a limited purpose. It must be returned or destroyed upon request. Disclosure, reproduction or use of this document and any information
contained within it, in full or in part, for any purpose is forbidden without the prior written consent of HBB. No photographs may be taken of any article fabricated or assembled
from this document without the prior written consent of HBB.
Revision Description:
Production Release
Request Number:
DOC2649
Revision Date:
4/17/12
Approved by:
DOC2649
4421 Waterfront Drive
Glen Allen, VA 23060
Issue Code(s):
CS, SP
Page:
1
of
4
Document #:
520006200
Rev:
A
ENG-FRM-RIC-4.32, Rev. E
HBF500S-230V Food Blender Technical Information
Trouble Shooting Guide
-
Symptom:
During a normal cycle the machine stopped.
-
Cause:
The unit has possibly overheated. Check the electric circuit. Check the reset switch. If
both check OK unplug the machine, allow it stand for 15-30 minutes. Plug it back in and try
running the machine.
Repair Guide
Housing Disassembly (see figure 1)
-
Turn power switch to “off” position and unplug the machine.
-
Remove feet.
-
Remove the four screws under the feet.
-
Carefully lift bottom from unit; wires will limit your movement.
Figure 1. Machine interior.
Wiring Detail
Cord
(see figure 2)
-
White cord lead splits with one lead connecting to the PC board terminal N and one lead
connecting to the inside terminal of the circuit breaker switch.
