5
How to Brew a Single-Serve Pod
w
WARNING
Burn Hazard.
If overflow occurs, unplug and allow coffee maker to cool.
To avoid hot coffee overflowing:
• Fully insert cup or travel mug on drip tray.
• Do not lift lid during the brewing process.
w
CAUTION
Cut Hazard.
Removable single-serve pod holder has a sharp needle. Piercing
needle on underside of lid is also sharp. Use caution when handling.
NOTES:
• If Lid is opened after, BREW NOW I/ or CARAFE ( ) button was
pressed, discard contents of cup or travel mug. Discard used Pod.
Add new Pod and press BREW NOW I/ button to restart brewing
cycle.
• Use only cold water in Reservoir. Do not use hot water.
• Do not reheat coffee in machine.
• Do not use creamer or nondairy creamer in Reservoir.
• After brewing hot cocoa single-serve pods, brew a water-only cycle
without a single-serve pod to avoid possibility of clogging Piercing
Needle.
• Press BREW NOW I/ button again to stop brewing midcycle.
• If brew indicator light flashes three times, Lid is not closed. Lower
Lid until it clicks to lock. Press BREW NOW I/ button.
• Do not brew coffee without Removable Needle Holder locked into
place.
1. Lift up Single-Serve Water Reservoir and
remove Lid. Add water to at least MIN fill
line (15 oz. [444 ml]) or MAX fill line (40
oz. [1.2 L]).
2. Plug into outlet.
3. Press CUP SIZE ( ) button and select
8, 10, or 14 oz.
4. Lift Lid Latch until Lid clicks into place.
5. Place Gray Removable Single-Serve Pod
Holder in Funnel.
6. Place a pod into Single-Serve Pod
Holder. Do not remove foil.
7. Close Lid and snap in place to pierce
single-serve pod.
8. Press BREW STRENGTH (
) button
to select regular or bold.
9. Use Cup Rest for a cup or mug and
remove Cup Rest for a travel mug.
10. Press BREW NOW I/ button to start
brewing. Brew indicator light will
light up to show that Coffee Maker
is brewing. Coffee Maker will shut
off automatically when brewing is
complete.
11. Unplug.
12. Single-Serve Pod Holder should be
rinsed after every use.
