Hamilton Beach B91, Operation Manual - Original Instructions

Page: 4 / 31

7 6
Glass Blender Jar
Parts and Features
BEFORE FIRST USE: After unpacking blender, wash everything except blender
base in hot, soapy water. Dry thoroughly. Wipe blender base with a damp
cloth or sponge. DO NOT IMMERSE BASE IN WATER. Care should be taken
when cleaning inside of blender jar as cutting blade assembly is very sharp.
Lid
Two-Piece Removable
Quiet Shield
Cutting Blade
Assembly
Sound-Absorbing Jar Pad
20-oz.
(600 ml)
Personal
Jar
Drinking Lid
Personal Blender Jar
(optional accessory
on select models)
Handle
ON (I)/OFF ( ) (Power) Switch
Pour Spout
Vent
Jar Collar
CANCEL Button
PULSE Button
Base
5 Speed Buttons
Program Buttons
Shield Locking Button
Shield Locking Button
Model: 53602-SAU
Type: B91
Ratings:
220–240 V~ 50–60 Hz 400 W
CONTROL PANEL
PULSE
CANCEL
SMOOTHIE
ICE CRUSH
CLEAN
Parts and Features
(cont.)
Lid: The lid is easy to put on, take off, and clean. Always use lid when
machine is in operation and to pour.
Blender Jar: Ounces, cups, and milliliters are clearly marked.
ON (I)/OFF ( ) (Power) Switch: The ON (I)/OFF ( )
(power) switch is located on right-hand side of
blender base. This lighted switch controls power to
blender.
Program Buttons: There are three program settings:
SMOOTHIE ( ), ICE CRUSH ( ), and CLEAN ( ).
Select desired program by pressing button for that
program.
5 Speed Buttons: Five speeds start at low and increase to high.
PULSE (
) Button: Press and hold down PULSE
button to blend at high speed setting.
CANCEL (
)
Button: Stops blender at any time.
Quiet Shield: The Quiet Shield reduces amount of
noise from your blender. When placed over blender
jar, it muffles sound that your blender produces.
Personal Blender Jar: The personal blender jar makes it easier to
make beverages to take on the go.
Base: Contains motor. DO NOT IMMERSE BASE IN WATER.
Preparing Blender: After unpacking blender, wash everything except
blender base in hot, soapy water. Dry thoroughly. Wipe blender base
with a damp cloth or sponge. DO NOT IMMERSE BASE IN WATER.
Care should be taken when handling cutting blade assembly since it
is very sharp. Refer to care recommendations on page 12.
IMPORTANT: Blender jar and cutting blade assembly are subject to
wear during normal use. Always inspect jar for nicks, chips, or cracks.
Always inspect cutting blade assembly for broken, cracked, or loose
blades. If jar or cutting blade assembly is damaged, do not use. Call
our customer care center to obtain replacement parts.
Selecting Blender Settings: Select from three program settings or
five speed buttons from low to high ( ).
WARNING
Burn Hazard. Metal parts under
blending jar get hot after use.
Do not touch.