background image

 5

4

SAVE THESE INSTRUCTIONS

25.

   

CAUTION! I

n order to avoid a hazard 

due to inadvertent resetting of the thermal cut-
out, this appliance must not be supplied through 
an external switching device, such as a timer, or 
connected to a circuit that is regularly switched 
on and off by the utility.

26.  

Y

our plug is provided with a fuse approved 

by 

ASTA

 to 

B.S.

 1362. 

I

f you need a 

replacement fuse carrier, it must be replaced 

with the same colour-coded carrier with the 
same markings. 

F

use covers and carriers can be 

obtained from approved service agents.

27.  

D

o not operate more than 2 minutes ON at a 

time.

28.  

D

o not damage the Quiet Shield interlock.

Other Consumer Safety Information

This appliance is intended to be used in household and similar 

applications such as:
– staff kitchen areas in shops, offices, and other working  
   environments;
– farm houses;
– by clients in hotels, motels, and other residential-type  
   environments;
– bed and breakfast-type environments.
The length of the cord used on this appliance was selected to 
reduce the hazards of becoming tangled in or tripping over a 
longer cord. If a longer cord is necessary, an approved extension 

cord may be used. The electrical rating of the extension cord must 
be equal to or greater than the rating of the appliance. Care must 
be taken to arrange the extension cord so that it will not drape 
over the countertop or tabletop where it can be pulled on by 
children or accidentally tripped over. 
If the cutting unit blades lock and do not move, it will damage the 
motor. Do not use. Call the toll-free customer service number for 
information.
Do not place blender jar in the freezer filled with food or liquid. 
This can result in damage to the cutting blade assembly, jar, 
blender, and possibly result in personal injury.

Recycling the Product at the End of Its Service Life
The wheeled bin symbol marked on this appliance signifies that it must be taken over by a selective 

collection system conforming to the WEEE Directive so that it can be either recycled or dismantled in 

order to reduce any impact to the environment. The user is responsible for returning the product to 

the appropriate collection facility, as specified by your local code. For additional information regarding 

applicable local laws, please contact the municipal facility and/or local distributor.

Other Consumer Safety Information - Continued

Summary of Contents for B91
































Reviews: