background image

4

If the cutting blade assembly locks and will not move, it will damage 
the motor. Do not use. Call the toll-free customer service number for 
information.
Do not place blender jar in the freezer filled with food or liquid. This 
can result in damage to the cutting blade assembly, jar, blender, and 
possibly result in personal injury.

Wattage/Peak Power Information

The wattage/ampere rating of the blender is determined by an 
Underwriters Laboratory test and is based on available cutting blade 
assembly and jar combinations that may not be provided with your 
unit, but are available as replacement parts. This is a measure of 
input wattage/amperes after 30 seconds of operation. The blender 
as provided may draw significantly less power. 
Peak power is the measure of the motor wattage during the first 
seconds of operation. This is when a blender requires the most 
power to crush ice, frozen fruit, etc. This is a better measure of what 
a blender motor can consume when power is needed most.

BEFORE FIRST USE:

 After unpacking blender, wash everything 

except blender base in hot, soapy water. Dry thoroughly. Wipe 
blender base with a damp cloth or sponge. DO NOT IMMERSE 
BASE IN WATER. Care should be taken when handling cutting blade 
assembly as it is very sharp.

Other Consumer Safety Information

840243700  ENv04.indd   4

840243700  ENv04.indd   4

3/27/14   5:43 PM

3/27/14   5:43 PM

Summary of Contents for 840243700











Reviews: