7
1.
To clean the mixing shaft, place 8
ounces (250 ml) warm, soapy
water in stainless steel container.
Place container onto Drink Mixer.
Set Control Switch to Low for 30
seconds. When finished, turn unit
to
O
(OFF).
2.
Repeat Step 1 with warm water
only to rinse mixer shaft.
3.
With unit turned to
O
(OFF),
unplug unit and wipe residual soap
and water from the mixing shaft
with a damp cloth or sponge.
4.
The metal mixing container should
be washed in warm, soapy water
or in a dishwasher.
5.
To clean drink mixer, wipe with
damp cloth or sponge. Do not use
abrasive cleansers of any type.
DO NOT IMMERSE APPLIANCE IN
WATER OR OTHER LIQUID.
Cleaning your Drink Mixer
• Most drinks can be mixed in less
than two minutes.
• Whole fruit should not be used
when making fruit drinks. Mash or
puree fruit; add to drink, and mix.
Fruit may be sliced if chunks are
desired.
• The container must always be filled
to at least the minimum level mark
or the liquid will not reach mixing
shaft. Do not fill above maximum
level mark (12 ounces/350 ml) or
liquid may overflow while mixing.
• For best results, all liquid ingredi-
ents should be as cold as possible.
Milk drinks will taste best if milk is
ice cold. The colder the milk, the
thicker and more frothy the drink.
• All syrups and powdered mixes
should be added just before mixing
to prevent them from sinking to the
bottom of the container.
• The drink mixer does not crush ice.
For best results, use crushed ice if
the recipe calls for ice.
Drink Mixer Tips
840141900 ENv00.qxd 10/25/05 9:07 AM Page 7
