Hamilton Beach Commercial Durathon, Operation Manual, Page: 6 / 120

Operating the Iron
Hot Dot Indicator
After the iron has been preheated (approximately 2
minutes after turning on the iron), the Hot Dot Indicator
will gradually change from all black to red. When the
dot is all black again, the iron is cool enough to put
away (approximately 35 minutes after turning off the
iron). WARNING! Burn Hazard: The Hot Dot Indicator is a
guideline only. Always avoid contact with the soleplate
of the iron.
Due to usage conditions, the Hot Dot Indicator may
stop working before the end of the iron’s useful life.
It may start to remain red after the iron cools down.
Replacement Hot Dot Indicators are available by calling
1.910.693.4277.
Iron is cool enough to store. Iron is too hot to store.
6