Hamilton Beach Commercial Durathon, Operation Manual, Page: 4 / 120

Operating the Iron
How to Dry Iron
1. Plug iron into outlet.
2. Set the Adjustable Steam Switch to (Dry Iron).
3. Turn Temperature Control Dial to desired
temperature. Allow 2 minutes for iron to reach
desired temperature.
4. To turn iron off, turn Temperature Control Dial to
OFF.
5. Unplug iron.
IRON POSITION
Resting on soleplate
Resting on either side
Resting on heel
MOTIONLESS TIME
30 seconds
30 seconds
15 minutes
Position-Sensing Auto Shutoff
The iron will turn off automatically when left in the following positions. The Auto Shutoff time varies based on
the iron’s position.
NOTE: Moving the iron will reset the Auto Shutoff sensor.
4
How to Steam Iron
1. Set the Adjustable Steam Switch to (Dry Iron).
2. Unplug iron.
3. Pour tap water into water tank opening, no more
than to the MAX fill line.
4. Plug iron into outlet.
5. Turn Temperature Control Dial to desired fabric
setting in the steam range. Allow 2 minutes for iron
to reach desired temperature.
WARNING! Burn Hazard: Attempting to steam iron
on a lower temperature setting or failing to allow the
iron to preheat for 2 minutes can result in hot water
dripping from the soleplate.
6. Set Adjustable Steam Switch to the desired steam
level.
7. For vertical steaming, hold iron 6 inches (15 cm)
from garment and do not allow hot soleplate to
touch delicate garments. Press and release the
Steam Burst Button to steam out wrinkles. Wait
at least 5 seconds before pressing Steam Burst
Button again.
8. To turn iron off, set Adjustable Steam Switch to
(Dry Iron).
9. Turn the Temperature Control Dial to OFF.
10. Unplug iron.