www.hamgadgets.com
2014-01-17
ID-O-Matic III
15
Courtesy Beep
The courtesy beep can be transmitted each time after the COR signal drops to let a listener know
that the person talking has stopped transmitting. While it’s referred to as a courtesy “beep”, you
can set it to any Morse code character or up to three characters. Use “E” for a short beep, or “T”
for a longer beep. The length of the beep can be adjusted using the Morse code speed setting. If
you don’t want to use a courtesy beep, simply set the beep off by typing a single space character.
The beep delay is the amount of time after COR drops that the beep will be sent. This value is
entered in
tenths of a second
, so for one second you would enter “10”. And lastly, the audio
frequency of the courtesy beep can be set here, independent of the Morse code ID tone.
Summary of Contents for ID-O-Matic III
Page 1: ...www hamgadgets com 2014 01 17 HamGadgets ID O Matic III Assembly Setup and Use Guide ...
Page 26: ...www hamgadgets com 2014 01 17 ID O Matic III 26 PCB Layout Schematic Rev C ...
Page 27: ...www hamgadgets com 2014 01 17 ID O Matic III 27 PCB Layout Schematic Rev D ...
Page 32: ...www hamgadgets com 2014 01 17 ID O Matic III 32 ...