5
Subject to change without notice
The 150 MHz
)
Analog-/Digital-Oscilloscope HM1507-3
(200MSa/s
Autoset
Auto Cursor
Readout / Cursor
Save / Recall
2 Reference Memories
Dual Time Base
Component Tester
1kHz/1MHz Calibrator
RS232 Interface
Digital:
I
Refresh, Single, Roll-, Envelope-, Average-,XY-Mode
I
Max. Sampling Rate 200MSa/s, Storage 2x2048x8 bit
I
Time Base A: 100s - 50ns/div., B: 20ms - 50ns/div.
I
Pre Trigger 25-50-75-100%, Post Trigger 25-50-75%
I
Screen Refresh 180/s, Dot Join (linear)
Analog:
I
2 x DC to 150MHz, 2 x 1mV-50V/div
I
Time Base A with Trig. DC to 250MHz
I
Time Base B with 2ndTrig. to 250MHz
I
Trig. DC to 250MHz, TV Sync. Separator
I
1kHz/1MHz Calibrator, CRT with 14kV
Specifications
Vertical Deflection
Operating modes:
Channel I or II separate
both Channels (alternated or chopped)
Chopper frequency:
approx. 0.5MHz)
Sum
or
Difference:
from CH I and CH II
Invert:
CH I and CH II
XY-Mode:
via channel I (Y) and channel II(X)
Frequency range:
DC to 150MHz (-3dB)
Rise time:
<2.3ns
Overshoot:
≤
1%
Deflection coefficient:
14 calibrated positions
from
1mV/div to 20V/div
in 1-2-5 sequence,
variable 2.5:1 to min.
50V/div
.
Accuracy in calibrated positions
1mV/div – 2mV/div:
±5%(DC-10MHz(-3dB))
5mV/div – 20V/div:
±3%
Input impedance:
1M
Ω
II 15pF
Input coupling:
DC-AC-GD (ground)
Input voltage:
max. 400V (DC + peak AC)
Delay line:
approx. 70ns
Triggering
Automatic
(peak to peak):
20Hz-250MHz
(
≥
0.5div.)
Normal with level control:DC-250MHz
(
≥
0.5div.)
Indicator for trigger action:
LED
Slope:
positive or negative
Sources:
Channel I or II, line and external
ALT. Triggering:
CH I/CH II (
≥
0.8div.)
Coupling: AC
(10 – 250MHz)
DC
(0 – 250MHz)
HF
(50kHz – 250MHz)
LF
(0 – 1.5kHz)
NR
(Noise reject)0 - 50MHz (
≥
0.8div.)
Triggering time base B:
normal with level control
and slope selection (0 – 250 MHz)
External:
≥
0.3V
pp
(0 – 250MHz)
Active TV Sync. Separator:
field & line, + / –
Horizontal Deflection
Analog Time Base:
Accuracy in calibr. position 3%; 1-2-5 sequence
A:
0.5s-50ns/div.
B:
20ms-50ns/div.
Operating modes:
A
or
B
, alternate
A/B
Variable:
2.5:1 up to 1.25s/div.
X-MAG. x10 (
±
5%)
max. 5ns/div.
Holdoff time:
variable to approx. 10:1
Bandwidth X-amplifier:
0 – 3MHz (-3dB)
X-Y phase shift:
<3° below 220kHz
Digital Time Base:
Accuracy:
3%; 1-2-5 sequence
A:
100s-0.1µs/div.
Peak detect:
100s – 5µs/div.
B:
20ms-0.1µs/div.
Peak detect:
20ms – 5µs/div.
Operating modes:
A
or
B
, alternate
A/B
X-MAG. x10 (
±
5%):
10ns/div.
Bandwidth X-Amplifier:
0 – 20MHz (-3dB)
X-Y phase shift:
<3° below 20MHz
Input X-amplifier:
via Channel II
Sensitivity:
see CH II
Digital Storage
Operating modes:
Refresh, Roll, Single, XY
Peak Detect, Average (2 to 512), Envelope
Dot Join function:
automatically
Acquisition (real time)
8 bit flash A/D
max. 200MSa/s
Peak detect:
5ns
Display refresh rate:
max. 180/s
Memory & display:
2k x 8bit per channel
Reference memory:
2 waveforms 2k x 8bit
Saved in:
(EEPROM).
Resolution (samples/div.):
X
200/div.
Y
25 /div.
XY
25 x 25/div.
Pre-/Post Trigger:
25,50,75,100, -25,-50,-75%
Operation / Control
Manual:
front panel switches
Auto Set:
signal related automatic
parameter selection
Save & Recall:
9 user defined parameter settings
Readout & Cursor
(analog/digital)
Display of parameter settings and other functions
on the screen. Trigger point indication.
Cursor measurement of
∆
U,
∆
t or 1/
∆
t (frequency),
separate or in tracking mode.
Readout intensity:
separately adjustable.
Interface
PC remote control:
built in RS232 interface
Option:
HO79-6
Multifunction-Interface
IEEE-Bus, RS232, and Centronics
Output formats
(HO79-6)
:
PCL, Post Script
HPGL, EPSON
Opto interface
HZ70
Component Tester
Test voltage:
max. 7V
rms
(o/c).
Test current:
max. 7mA
rms
(s/c)
Test frequency:
approx.50Hz
One test lead is grounded (Safety Earth)
General Information
CRT:
D14-375GY, 8x10cm internal graticule
Acceleration voltage:
approx. 14kV
Trace rotation:
adjustable on front panel
Calibrator:
0.2V ±1%,
≈
1kHz/1MHz (tr <4ns)
Line voltage:
100-240V AC ±10%, 50/60Hz
Power consumption:
approx. 47 Watt at 50Hz
Min./Max. ambient temperature:
0°C...+40°C
Protective system:
Safety class I (IEC1010-1)
Weight:
approx. 6.5kg (12.4lbs)
Color:
techno-brown
Cabinet:
W
285,
H
125,
D
380 mm
Lockable tilt handle
7/00
Accessories supplied: Operators Manual and PC software on CD-ROM, 4 Disks, Line Cord, 2 Probes 10:1
