www.hameco.eu
HV-51 User Manual
hameco
33
4.2.4 Configuration
Click Configuration to enter into the device parameters setting page.
These are the following options: Local configuration,audio configuration,video configuration,network
configuration,PTZ configuration,internet access configuration,system configuration,for a detailed de
-
scription please see the following table.
1) Local configuration
Video Preview Mode:
user can choose real-time priority or fluency priority: The delay will be small when
under real time priority mode and fluency will be good when under fluency priority mode. Setting based
on user needs (Default value: real time normal (2),real time best (1),fluency normal (3),fluency good (4)
and fluency best (5))
Recording packing time(minute):
Set recording video packing time
(default is 10,range from 1~120 minutes)
Recording/Snapshot file storage route:
Set local recording video/snapshot file storage route.(Default
D:\MyIPCam\) Click the Save button to make settings effective
2) Audio Configuration
Switch:
Choose to enable or disable the audio.
Compressing format:
Set audio compressing format and the device will reboot automatically after
change (default MP3,PCM,AAC optional)
Sampling frequency:
Set sampling frequency and the device will reboot automatically after change (de-
fault 44100,16000,32000 and 48000 optional)
Sampling precision:
Set sampling precision (default 16bits)
Compressing code rate:
Set audio compressing code rate (default 64bits,32,48,96,128bits optional)
Note: Click “SAVE”,it will remind” the user that Enable has changed. Restart the device to take
effect after uccessfully saving.”,then please reboot the camera to put the new setting into effect.
Menu
Explanation
Local configure
Including video preview mode,record video packing time,record video
storage route settings etc.
Audio configure
Including audio compressing format,sampling frequency,sampling
precision,compressing code rate settings etc.
Video configure
Including video encoding,video parameters,character-overlapping,charac-
ter size,video output setting etc.
Network configure
Including basic parameters,Ethernet,DNS,wireless network setting,
GB28181 etc.
System configure
Including equipment property,system time,user management,version
update,Reset,Reboot device settings etc.
