www.hameco-headset.com
6
HS-8000 User Manual
Manual pairing mode
If you wish to use the headset with a different phone, or if the pairing pro
-
cess was interrupted, you can manually set the headset to pairing mode.
Make sure the headset is on. Press and hold the answer/end button for ap-
proximately 5 seconds until the Bluetooth
®
icon turns from a steady light to
a flashing light. Then repeat steps 2 and 3 in the above pairing guide.
Connecting with your phone
Pairing is only required the first time a headset and phone are used togeth
-
er. When the headset and phone have been paired once, they will automat-
ically connect when the headset is on and Bluetooth
®
is activated on the
phone. The headset can be used when it is “connected” to the phone. If the
devices are paired, but do not immediately connect, tap the answer/end
button. When your headset is connected the Bluetooth
®
connection icon on
the STATUS DISPLAY™ WILL BE ON CONSTANTLY FOR 3 SECONDS and the
headset voice guidance will say “connected”.
8. WEARING YOUR HEADSET
The HS-8000 BLUETOOTH is ready to be worn. For optimal performance,
wear the HS-8000 BLUETOOTH and your mobile phone on the same side
of your body or within line of sight. You will get better performance when
there are no obstructions between your headset and your mobile phone.
