www.hameco-headset.com
5
HS-8000 User Manual
7. PAIRING IT WITH YOUR PHONE
Headsets are connected to phones using a procedure called “pairing”. By
following a few simple steps, a phone can be paired with a headset in mat-
ter of minutes.
1. Put the headset in pairing mode
•
When you turn on your HS-8000 BLUETOOTH for the first time, the
headset will automatically start up in pairing mode – i.e. it is discover-
able for your phone. When the headset is in pairing mode the Bluetooth
®
status indication on the Status Display™ is flashing.
2. Set your Bluetooth
®
phone to “discover” the “HS-8000”
• Follow your phone’s instruction guide. First make sure that Bluetooth
®
is activated on your mobile phone. Then set your phone to discover new
devices. This usually involves going to a “setup,” “connect” or “Blue-
tooth” menu on your phone and selecting the option to “discover” or
“add” a Bluetooth
®
device.
3.
Your phone will find the “HS-8000”
•
Your phone will find the headset under name “HS-8000”. Your phone
then asks if you want to pair with the headset. Accept by pressing “Yes”
or “Ok” on the phone. You may be asked to confirm with a passkey or
PIN. Then use 0000 (4 zeros). Your phone will confirm when pairing is
complete and the Bluetooth
®
status indication on the Status Display™
will shift from a flashing light to a steady light and the headset voice
guidance will say “connected”.
CONNECTIVITY
Mobile surf
BLUETOOTH
Infrared port
WAP options
Synchronization
Networks
SELECT
HS-8000
Passkey:
****
OK
DEVICES FOUND
HS-8000
SELECT
HANDSFREE
HS-8000 added
The handsfree is
now ready for use
SELECT
