www.hameco.eu
HV-51 User Manual
hameco
8
1.2 Power on initial configuration
1)
Power on: Connect DC12V power supply adapter with power supply socket.
2)
Initial configuration: Power on with power indicator light on and remote control receiver light
blink-
ing, camera head moves from bottom left to the bottom, and then goes to the HOME position (inter
-
mediate position of both horizontal and vertical ),while the camera module stretches. When remote
control receiver light stops blinking, the self-check is complete.
Note:
If you set preset 0, when the Power on self-test is completed, the camera automatically moves
to the preset 0 position.
1.3 Video Output
This series has a variety of video outputs; ST models have video output from LAN, HDMI and 3G-SDI,
U3 models from LAN and USB3.0 which are compatible with USB2.0, and U2 models from LAN and
USB2.0. HD models from LAN and HD-BaseT, HM Models from HDMI and Lan; U2U3 models from LAN/
USB2.0/USB3.0/HDMI ports.
1) Video Output from LAN
a.
Network Cable Connection Port: ST Model--No.12 in Figure1.1; U3 Model--No. 8 in Figure1.2; U2
Model--No.8 in Figure 1.3.HD Model--No.9 in Figure1.5; U2U3 Model --No.10 in Figure1.6.
b.
Webpage Login: Open your browser and enter 192.168.5.163 in the address bar (factory default);
press Enter to enter into the login page; click on the “player is not installed, please download and in-
stall!” and follow the installation steps for installation.
Then enter the user name admin and password admin (factory default); press Enter to enter into the
preview page, users can carry out PTZ control, video recording, playback, configuration and other op
-
erations.
2) HDMI Video Output
a.
HDMI Video Cable Connection: ST models refer to No.11 in Figure1.1. U2U3 models refer to No.9 in
Figure1.6.
b.
Connect the camera and the monitor via HDMII video cable; video output is available after camera
self-test.
3) 3G-SDI Video Output
a.
3G-SDI video cable connection: ST models refer to No.10 in Figure1.1.
b.
Connect the camera and the monitor via 3G-SDI video cable; video output is available after camera
self-test.
4) USB3.0 video output
a.
USB3.0 video cable connection: U3 models refer to No.7 in figure1.2.U2U3 models refer to No.8 in
Figure1.6.
b.
Connect the camera and the monitor via USB3.0 video cable, open video display software, select
image device, and then video
output will be available.
