12
Figure 1:
Water fittings
6. Connect the Remote Control Unit to the I/O connector on the Power Supply Controller using the
supplied cable. The Remote Control Unit is shipped with an interlock jumper plug installed. To use the
remote interlock function, connect a remote contact or solid-state switch across pins 1 and 3. Mating
connector is a standard 3-pin mini-DIN, CUI Inc. part no. MD-30 or equivalent. See Figure 5 for pin
connections.
Figure 2:
EQ-99-RC Remote Control Rear Panel
Hold the fitting body
with one wrench.
Tighten the nut
with the other.
PIN 1
PIN 3
Summary of Contents for ENERGETIQ LDTLS TLS-EQ-77H
Page 3: ......
