6. INSTALLATION
C
a
r
e
f
u
l
l
y
unpack the equipment, and see that all system components
6.1 U n p a c k i n g
d e s c r i b e d in
Section
3 of this manual are secure and undamaged.
W
h
e
n
installing the equipment, attention should be paid to the following
6.2 Installation Site points:
1. D o not use or locate the equipment near a strong electrostatic or
magnetic field.
2. Situate where temperature is in the range of 0 - 4 0 ° C.
3 T h e site chosen should
be
relatively free of temperature fluctuations.
4. Humidity should be maintained at less than 90 % (non-condensing).
5. Location site should be free of vibration.
6. T h e instrument should not be exposed to highly corrosive gas(es).
(Chlorine, fluorine, etc).
7. K e e p location clean.
8. A v o i d direct exposure to sunlight.
9. A l l o w adequate space around the CCU for efficient air exchange —
exhaust fan at rear of CCU and side vents.
C
o
n
n
e
c
t
i
o
n
of the camera head to the optical imaging system is made
6.3
I n s t a l l a t i o n o f
v i a a standard, 1" C-mount adaptor.
C a m e r a H e a d
D e p e n d i n g on the geometry of the camera head installation it may be
necessary to stabilize the camera via a camera stand, base plate, etc.
7
