C11440-42U30/C11440-42U31 Instruction manual_Ver.1.2
42
Figure 9-22
(Start trigger mode)
Note
•
Please contact to Hamamatsu subsidiary or local distributor for the detail of the timing information.
9-3-5-3
Global exposure timing output
It shows the global exposure timing where all lines in the top area or the bottom area expose at
the same time. When W-VIEW Mode, there are two kinds of global exposure timing output for the
longer and the shorter exposure time. In this case, DCAM Configurator can only set either global
exposure timing output for the longer or shorter exposure time.
Note
•
There is no output signal when the exposure time for the both top and bottom area is shorter
than the frame readout time.
