32
33
In the even that the reception during the above time slots is completely or at times interfered with or has broken down,
these forecasts, or parts of them, will be missing.
This package comes with a main unit which is Meteotime Weather Station, and a remote outdoor Thermo-hygrometer
sensor.
This Meteotime Weather Station has equipped the thermo-hygrometer sensor to measure the indoor temperature and
humidity, and also has a wireless outdoor thermo-hygrometer sensor to measure the outdoor temperature and humidity.
Key Features:
• Weather Status for today and coming three days for 470 cities
• Rain/Snow/Hail Probability for Today
• Wind Speed and Wind Direction for Today
• Single channel outdoor 433Mhz wireless Thermo-hygrometer
• Indoor Thermo-hygrometer
• Sunrise and sunset display
• Regional Day-time temperature and Night-time Temperature information
• Critical Weather Alert
• Radio-controlled Clock and Calendar
• Time-zone setting
• Powered by 2 AA batteries for main unit, and 2 AA batteries for the outdoor sensor
INTRODUCTION
The Meteotime Weather Station LCD display shows:
• Today Weather Information Window
• In/Outdoor Temperature & Humidity
• Tomorrow, One-day-after, and Two-day-after Weather Information
• Information Window which shows Time & Date, Sunrise & Sunset, Cities, and Critical Weather Information Description.
Today Weather Information including Wind Speed, Wind Direction,
and the probability of Rain/Snow/Hail, Day & Night Temperature,
Day & Night Weather Status
In/Outdoor Temperature & Humidity
Tomorrow, One-day-after, and Two-Day-after Weather Information
including Day & Night Temperature, Day & Night Weather Status
Information Window
There are total 7 buttons on the Main Unit, namely:
SET
•
Selected City
Time + Date
S Sunset
• Each press of [SET] will display the selected City, Time +
Date or S Sunset
• Press and HOLD [SET] for 3 second to select your <1>
Country, <2> Time Zone, <3> Language, <4> Contrast of
the LCD display
DAY/NIGHT
Critical Whether Information
Time + Date
Day/Night
Weather Status Change
• Increasing the value during setting.
• Chose one of the pre-selected cities .
• Decreasing the value during setting.
• Chose one of the pre-selected cities.
MEM
• Display the maximum and minimum measured
Temperature in record.
• Press and Hold for 3 second to clear all the Max. and
Min. record.
TEST
√
• Find the place for the device which has a good
reception
• Add the city into the list of your desired cities OR remove
the city out of the list of desired Cities
• Edit your home town
IN/OUT
• Switch to read Indoor Thermo-hygrometer
Outdoor
Thermo-hygrometer.
• Press and Hold for 3 second to force the main unit to
search for the outdoor sensor.
GETTING START
• Insert the batteries for remote units, and then insert
batteries for the main unit.
• The main unit will automatically scan for the
radio-controlled clock signal and the Meteotime
Weather signal.
• The time and date signal will be received in a few
minutes. Since there is a large amount of Weather
information for all regions and days, the unit needs
about 24 hours from the time of the initial setup to
complete the reception of all data
• After the time and date signal is being received
successfully, the display shows “SELECT COUNTRY”
and then “FRANKFURT” as default city in the
information window.
• To change the Country and the City please see the
information below.
• If the unit is able to receive the Meteotime signal
successfully, the Meteotime icon
is appeared in the
second row of display. Otherwise, the Meteotime will
be
.
