• Open the battery compartment (4), insert two AAA
batteries with the correct polarity and close the battery
compartment (4).
• If the battery charge is low, the Bluetooth/battery status
LED (1) will begin to flash blue during operation. Replace
the batteries immediately as described above.
6. Operation
Note
• The functions described in this section are only available
for Bluetooth-capable terminal devices.
• Note that the maximum range for Bluetooth is 10
metres without obstacles such as walls, people, etc.
6.1 Bluetooth
®
pairing
Note – Pairing
• Make sure that your Bluetooth
®
-capable terminal device
is on and Bluetooth
®
is activated.
• Make sure that your Bluetooth
®
-capable terminal device
is visible for other Bluetooth
®
devices.
• For more information, please refer to the operating
instructions of your terminal device.
• Slide the
[OFF/ON]
switch (2) to the
ON
position to switch
on the Bluetooth
®
keyboard. The Bluetooth
®
/battery status
LED (1) flashes blue.
• Press and hold the
[CONNECT]
button (3) until the
Bluetooth
®
/battery status LED (1) begins to continually
flash blue. The keyboard is searching for a Bluetooth
®
connection.
• Open the Bluetooth
®
settings on your terminal device and
wait until
Hama KEY4ALL X300
appears in the list of
Bluetooth
®
devices found.
• Select
Hama KEY4ALL X300
, follow any instructions on
your terminal device, and wait until the keyboard is shown
as connected in the Bluetooth
®
settings on your terminal
device. The Bluetooth
®
/battery status LED (1) goes out.
• You can now use the Bluetooth
®
keyboard.
6.2 Automatic Bluetooth
®
connection (after successful
pairing)
Note
• Make sure that your Bluetooth
®
-capable terminal device is
on and Bluetooth
®
is activated.
• Make sure that your Bluetooth
®
-capable terminal device is
visible for other Bluetooth
®
devices.
• For more information, please refer to the operating
instructions of your terminal device.
• Slide the [
OFF/ON
] switch (2) to the ON position to switch
on the Bluetooth
®
keyboard. The Bluetooth
®
/battery status
LED (1) flashes blue.
• You can now use the Bluetooth
®
keyboard.
Note – Connection impaired
After the devices have been paired once, the connection
is then established automatically. If the Bluetooth
®
connection is not established automatically, check the
following:
• Check the Bluetooth
®
settings of your terminal device
to see whether
Hama KEY4ALL X300
is connected.
If not, repeat the steps listed under 6.1 Bluetooth
®
pairing.
• Check whether obstacles are impairing the range. If so,
move the devices closer together.
6.3 Changing the operating system
The Hama KEY4ALL X300 keyboard supports three different
operating systems. You can use the following shortcut keys to
select the desired operating system:
• fn + Q for Apple iOS
• fn + W for Android
• fn + E for Windows
