18
11.3 Stopping the alarm/ Snooze function
•
When the alarm activates, press [ ]/ [ ] to
stop the alarm.
•
The alarm turns off for the selected time interval
(5/10/15/30/60 minutes) before activating once again.
•
If the alarm is not stopped, the radio automatically
switches into standby mode after one hour.
•
Hold the [ ]/ [ ] button down for approximately
3 seconds to finally stop the alarm.
12. Timer
The radio is equipped with an egg timer, which emits an
alarm tone after a pre-defined length of time has elapsed.
•
Press [ ]/[ ], select [
Egg Timer
] in the main menu and
confirm your selection by pressing [
ENTER/NAVIGATE
].
Press and hold
[ ]/[ ]
Main menu
Timer
Turn [
ENTER/NAVIGATE
] to select the desired
count-down time (0–99 minutes).
•
Press [
ENTER/NAVIGATE
] to display the time remaining.
•
Once the time interval has elapsed, press [
ENTER/
NAVIGATE
] to stop the alarm tone. Otherwise, the
alarm will stop automatically after 30 minutes.
•
Set the time interval to 0 minutes to turn off the egg
timer.
13. System settings
You can modify all settings and access important
information about the radio in the System settings.
13.1 Equaliser
The equaliser allows you to adjust the sound of the
radio to suit your preferences by amplifying or reducing
the amount of bass or treble in the audio .You can choose
from preconfigured profiles, adjusted to suit a variety of
music Genres, or create your own custom profile.
•
To set the Equaliser, proceed as follows:
Press and hold
[ ]/[ ]
System settings
Equaliser
•
Use [
ENTER/NAVIGATE
] to choose one of the
preconfigured profiles.
•
To create your own equaliser profile, choose the option
My EQ profile setup.
•
This takes you to the
bass
,
treble
and
• loudness
settings (volume amplification).
•
To adjust a particular value, press [
ENTER/NAVIGATE
]
at the corresponding menu item and then change the
value by turning [
ENTER/NAVIGATE
]. If playback is
already started when you modify these settings, you can
hear the changes in the audio immediately.
•
Confirm your settings by pressing [
ENTER/NAVIGATE
]
once more.
•
Complete the configuration process by pressing [ ]
on the device and confirm the saving of settings by
pressing [
ENTER/NAVIGATE
].
•
To use the new profile, choose the item
My EQ.
