2
G
Operating instruction
Controls and Displays
A Base station
1. Atmospheric pressure trend
2. Weather forecast symbol
3. 24 hour atmospheric pressure history
4. Atmospheric pressure
5. Moon phase
6. Measuring station radio symbol
7. Outdoor temperature and humidity
8. Room temperature and humidity
9. Radio symbol
10. Time
11. - button = increase the current set value / activate/deactivate
manual radio signal reception
12.
TEMP AL.
button = temperature warning button (which
specifies the limit values for the maximum and minimum
temperatures)
13. - button = reduce of the current set value / manual search
for a signal from the measuring station
14.
MODE
- button = settings/confirm the set value / choose
between the seconds, weekdays and time zone displays
15.
CHANNEL
- button = choose between the values measured on
several sensors
16.
ALARM
- button = choose the current alarm time/alarm mode
17. Recess for wall mounting
18. Battery compartment
19. button in the battery compartment = moon phase in recent
days/setting for the height above sea level or air pressure at
sea level for the barometer display
20. button in the battery compartment = moon phase in
coming days/setting for the height above sea level or air
pressure at sea level for the barometer display
21.
MEM
button in the battery compartment = memory button for
accessing the maximum and minimum values for temperature
and humidity
22. History/Archive button in the battery compartment = the
atmospheric pressure levels measured in recent hours
23. Unit button (pressure/altitude in the battery compartment) =
changes the display mode
24. Pressure/Altitude button (Unit button) in the battery
compartment = sets the altitude level or atmospheric pressure
display
25. Base
B Measuring station
26. Recess for wall mounting
27. Reset button = restores factory settings
28. Battery compartment
1. Explanation of Warning Symbols and Notes
Warning
This symbol is used to indicate safety instructions or to draw your
attention to specific hazards and risks.
Note
This symbol is used to indicate additional information or
important notes.
2. Package Contents
•
Weather station EWS-380
(base station for indoors/measuring station for outdoors)
•
2 x AA batteries
•
These operating instructions
3. Safety Instructions
•
The product is intended for private, noncommercial use only.
•
Do not operate the product outside the power limits given in the
specifications.
•
Protect the product from dirt, moisture and overheating, and
only use it in a dry environment.
•
Do not use the product in the immediate vicinity of heaters or
other heat sources or in direct sunlight.
•
Do not use the product in areas where the use of electronic
devices is not permitted.
•
Do not place the product near interference fields, metal frames,
computers, TVs, etc. Electronic devices and window frames can
negatively affect the product’s functionality..
•
Do not drop the product and do not expose it to any major
shocks.
•
Do not open the device or continue to operate it if it becomes
damaged.
•
Do not attempt to service or repair the product yourself. Leave
any and all service work to qualified experts.
•
Do not modify the product in any way. Doing so voids the
warranty.
•
Keep the packaging material out of the reach of children due to
the risk of suffocation.
•
Dispose of packaging material immediately according to locally
applicable regulations.
Warning – Batteries
•
Immediately remove and dispose of dead batteries from the
product.
•
Only use batteries (or rechargeable batteries) that match the
specified type.
•
Do not mix old and new batteries or batteries of a different type
or make.
•
When inserting batteries, note the correct polarity (+ and -
markings) and insert the batteries accordingly. Failure to do so
could result in the batteries leaking or exploding.
•
Do not charge batteries.
•
Keep batteries out of the reach of children.
•
Do not short circuit the batteries/rechargeable batteries and
keep them away from uncoated metal objects.
