19
•
Split screen function:
Using this function, up to four
images can be displayed simultaneously.
•
Auto play:
Function menu to set the conditions under
which the picture frame should start.
•
Factory settings:
Function menu to reset to factory
settings.
The buttons operation method is shown as below:
button:
shift items or choose parameters.
button:
enter the selected item.
Enter button:
confi rm the setup result.
8. Setting the automatic on/off function
To reach the settings menu, move to the settings in
the main menu using the buttons and then press
ENTER
. Move to the audio or video playback mode using
the arrow keys (the required function is marked with a
yellow bar). Use the buttons to set the required
function:
• Repeat
off
•
Repeat
all
• Repeat
individually
Then press
ENTER
and your audio or video fi le is
repeated continually.
9. Einstellung des Automatischen Ein – und Ausschalten
To reach the settings menu, move to the settings in the
main menu using the arrow buttons and then press
ENTER
. Move to the time setting using the arrow keys
(the desired function is marked with a yellow bar). You
can now set the desired time with the and
arrow buttons and confi rm your entry by pressing
ENTER
. Then press
ON
to activate the time setting.
Cleaning & Care:
Occasional care and cleaning of the device ensure a
long service life. Use a soft, lint-free cloth (e.g. Hama
item no. 51076/51077 etc.) to clean the device. Slightly
dampen the cloth if the device is very dirty. However,
never use strong solvents such as alcohol, petrol or
thinners. This could attack the casing or the protective
glass of the display.
Caution – Danger to life!
To prevent the risk of an electric shock, never open
the cover of the digital picture frame, casing or power
adapter components. There are no serviceable parts in
the digital picture frame or power supply.
Warranty/customer service
CAUTION!
Any guarantee or warranty claims are void if
the device is opened by unauthorised persons or service
workshops. Please contact the specialist dealer you
purchased the device from if you fi nd a fault with your
digital picture frame. Your dealer can quickly deal with
your customer service requirement without problem.
Service and repairs on your digital picture frame must
only be performed by authorised specialist workshops.
Wall mounting:
There are installation holes on the rear of the digital
picture frame to attach it to the wall using suitable
screws.
Picture viewing:
Insert a memory card and switch on the digital picture
frame. The start screen appears after a few seconds.
The preset mode of the digital picture frame displays the
data on the memory card.
