10
Connecting the speakers
Six speakers are provided with the unit (2 front, 1 center,
2 rear, 1 subwoofer). To achieve good surround effects,
all six speakers need to be connected to the receiver.
One speaker wire is provided with each speaker.
Speaker wires are color-coded to match the terminals.
Connect the speaker wire from the back of each
speaker to the corresponding color terminal at the back
of the unit. Press down the tab to open the terminal and
insert the wire. Release the tab to lock wire in the
terminal. Do the same for center speaker, rear
speakers and the subwoofer.
Note: When connecting the speakers, make sure
the polarities (“+” speaker wire to “+” on the receiver)
of speaker wires and terminals match. If the cords are
reversed, the sound will be distorted. Do not ground the
output line, it will damage the speaker.
Positioning speakers
"
Left, Right (Front Speakers)
Front speakers carry primarily music and sound
effects.
!
Center
In surround mode, the center speaker carries
most of the dialog as well as music and effects.
It should be set between the left and right
speakers.
#
Surround (Rear Speakers)
The rear speakers’ overall sound balance should
be as close as possible to the front speakers.
Proper placement is vital to establish an evenly
distributed sound fi eld.
Subwoofer
A subwoofer is designed to reproduce powerful
low bass effects (explosions, the rumble of
spaceships, etc.) which dramatically heighten
the action on the screen.
Courtesy Dolby Laboratories
00055455bda2.indd Abs2:10
00055455bda2.indd Abs2:10
07.08.2007 15:07:08 Uhr
07.08.2007 15:07:08 Uhr
