Nomenclature
1. Transmitter
A) Release Button
B) LED Indicator
C) Radio Channel
D) Battery-chamber cover
E) Antenna
2. Receiver
F) ON/OFF Switch
G) LED Indicator
H) Radio Channel
I) Battery-chamber cover
J) Cable
K) Camera connector
For Your Safety
To prevent damage to your product or injury to yourself or to
others, read the following safety precautions in their entirety
before using this equipment. Keep these safety instructions
where all those who use this equipment will read them.
!
Do not disassemble or modify
Failure to observe this precaution could result in electric
shock or product malfunction. Should the product break
open as the result of a fall or other accident, remove the
batteries.
!
Keep dry
Do not handle with wet hands or immerse in or expose to
water or rain. Failure to observe this precaution could
result in fi re or electric shock.
!
Do not use in the presence of fl ammable gas
Failure to observe this precaution could result in
explosion or fi re.
!
Keep out of reach of children
This device contains small parts which may pose a
choking hazard. Consult a physician immediately if a child
swallows any part of this device.
!
Do not expose to high temperatures
Do not leave the device in a closed vehicle under the sun
or in other areas subject to extremely high temperatures.
Failure to observe this precaution could result in fi re or in
damage to the casing or internal parts.
!
Observe precaution when handling batteries
Batteries may leak or explode if improperly handled.
Observe the following precautions when handling
batteries for use in this device:
• Use only batteries listed in this manual. Do not mix old
and new batteries or batteries of different types.
• Read and follow all warnings and instructions provided by
the
manufacturer.
• Do not short or disassemble.
• Do not expose to fl ame or excessive heat.
• Do not attempt to insert batteries upside down or
backwards.
• Batteries are prone to leakage when fully discharged.
To avoid damage to the product, be sure to remove the
batteries when leaving the product unattended for
prolonged periods or when no charge remains.
• Should liquid from the batteries come into contact with
skin or clothing, rinse immediately with fresh water.
Introduction
Thank you for your purchase of wireless remote shutter,
the product is suited to a wide variety of tasks. It offers
complete control of camera shutter without cumbersome
cable connections between the hand control units and the
camera.
Please refer to the main features as follows:
• Remote wireless control, effective remote shutter
distance (open space): 30m.
• 16-unique-channel supports multiple users’ environment.
• Strong interference-resistance capacity.
• Exhausted power prompting design.
• Ultra low-power consumption design benefi ts a longer
period of use.
• Wireless bulb shutter and continuous shooting function
(Corresponding function setting is required for camera).
Inserting Batteries
Transmitter:
Slide the battery-chamber cover (D) from the back of the
transmitter and insert one 12V/23A battery (enclosed in
package).
Receiver:
Slide the battery-chamber cover (I) from the back of
the receiver and insert two AAA 1.5v alkaline batteries
(enclosed in package).
g
Operating instruction
00005367bda.indd 8-9
00005367bda.indd 8-9
14.10.2008 10:20:24 Uhr
14.10.2008 10:20:24 Uhr
