3
g
Operating Instruction
Supported OS: Windows ME/2000+SP3/XP+SP1/Vista/Windows 7/Mac OS 10.x
Installation:
The required drivers are already integrated under Windows ME/2000+SP3/
XP+SP1/Vista/Windows 7/Mac OS 10.x. Connect the card reader to a free USB
port. Afterwards, this one is installed automatically.
Caution:
Make sure that the data transfer has ended before you remove the memory
card from the card reader. Always use the function “Eject” (click right on the
card reader drive where the memory card is insert, then click on “Eject”) of the
Explorer in order to remove the memory card.
If you want to use the Card reader with another operating system than those listed
above, please check fi rst if you can fi nd more information or drivers in the service
area at www.hama.com.
Important information for use with IBM/Hitachi Microdrive:
This Card Reader has no eject-function for CF-Cards. Because of this, you are only
allowed to remove a Microdrive by holding it at the sides! Heavy pressure on top
and bottom will damage the Microdrive ! Lost of data can be the possible effect!
Please refer also the manual of your Microdrive.
g
Operating Instruction
00049015bda.indd Abs1:3
00049015bda.indd Abs1:3
23.06.2009 13:35:33 Uhr
23.06.2009 13:35:33 Uhr
