Hama 00186415, Operating Instructions Manual

Page: 5 / 71

4
5. Installation
The clock can be attached to a glass surface,
such as a mirror, glass or tiles, using the suction
cup. Before attaching the clock, moisten the
suction cup for a more secure hold. Ensure
that there is no dust or grease on the surface
on which you want to attach the suction cup.
The suction cup can loosen over time; press
the suction cup against the wall every now and
then to ensure that the clock remains fixed on
the wall. Attach the clock to the wall in an area
where it will not be damaged if it should fall.
Warning – Mounting Note
• Before mounting the clock, ensure that
the chosen wall is suitable for the weight
to be mounted, and make sure that there
are no electrical wires, water, gas or other
lines at the installation site on the wall.
• Purchase special fastening materials from
specialised dealers.
• Do not mount the product above
locations where persons might linger.
6. Operation
• Once the battery has been inserted properly,
the clock will automatically start running.
• Use the setting wheel on the back of the
clock to set the time.
7. Care and Maintenance
Only clean this product with a slightly damp,
lint-free cloth and do not use aggressive
cleaning agents. Make sure that water does not
get into the product.
8. Warranty Disclaimer
Hama GmbH & Co KG assumes no liability and
provides no warranty for damage resulting from
improper installation/mounting, improper use
of the product or from failure to observe the
operating instructions and/or safety notes.
9. Technical Data
‘Mini’ bathroom clock
a
Power supply 1 x AAA Micro
battery