Hama 00186415, Operating Instructions Manual

Page: 4 / 71

3
Warning – Batteries
• When inserting batteries, note the correct
polarity (+ and - markings) and insert
the batteries accordingly. Failure to do
so could result in the batteries leaking
or exploding.
• Only use batteries (or rechargeable
batteries) that match the specified type.
• Before you insert the batteries, clean the
battery contacts and the polar contacts.
• Do not allow children to change batteries
without supervision.
• Do not mix old and new batteries or
batteries of a different type or make.
• Remove the batteries from products that
are not being used for an extended period
(unless these are being kept ready for an
emergency).
• Do not short-circuit batteries.
• Do not charge batteries.
• Do not throw batteries in a fire.
• Keep batteries out of the reach of children.
• Never open, damage or swallow batteries
or allow them to enter the environment.
They can contain toxic, environmentally
harmful heavy metals.
• Immediately remove and dispose of dead
batteries from the product.
• Avoid storing, charging or using the
device in extreme temperatures and
extremely low atmospheric pressure (for
example, at high altitudes).
4. Getting Started
4.1 Inserting the battery
• Remove the cover (1) of the product.
• Remove the battery that was already inserted
into the clock, remove the protective film if
necessary as well as the contact interrupter
and the re-insert the battery with the correct
polarity.
• The clock is ready for operation.
4.2. Replacing the battery
• Remove the cover (1) of the product.
• Remove and dispose of any used batteries.
Insert the new battery (AA). Ensure that the
polarity of the battery corresponds to the
symbols in the battery compartment.
• Attach the cover (1) of the product.