42
4. Ввод в эксплуатацию
•
Для питания гарнитуры предусмотрен аккумулятор. Перед
вводом гарнитуры в эксплуатацию необходимо полностью
зарядить аккумулятор.
•
Перед началом заряда отключите гарнитуру.
•
Начните зарядку, подсоединив
штекер USB
(11)
бокса для
зарядки
(8) к соответствующему разъему USB персонального
компьютера/ноутбука или к соответствующему зарядному
устройству USB. Затем вставьте гарнитуру в бокс для зарядки.
•
Во время зарядки
светодиодный индикатор
(3) непрерывно
светится красным.
•
Аккумулятор полностью заряжается до 2 часов.
Внимание
Не используйте гарнитуру во время зарядки!
•
Если аккумулятор полностью заряжен,
светодиодный
индикатор состояния
(3) светится белым.
•
По окончании работы отключите все кабельные и сетевые
соединения.
Примечание
Если устройство не эксплуатировалось несколько месяцев,
светодиодный индикатор
(3) при зарядке может включиться
через 15–30 минут.
5.Эксплуатация
Включение и выключение гарнитуры
•
Включение:
Включите гарнитуру с помощью
выключателя
(1). Вы
услышите уведомление «Power On» (питание включено), а
светодиодный индикатор
(3) начнет мигать белым.
•
Выключение:
Выключите гарнитуру с помощью
выключателя
(1).
Светодиодный индикатор
(3) засветится белым на короткое
время, и прозвучит уведомление «Power Off» (питание
выключено).
При первом включении автоматически запускается сопряжение
– см.
5.1. Первое соединение по технологии
Bluetooth
®
(сопряжение)