5
•
The headset and the terminal device should not be any further than
1 metre away from each other. The smaller the distance, the better.
•
Ensure the headset is off.
•
Device off:
Switch on the headset using the
on/off switch
(1).
A voice says, ‘Power on’ and the
LED indicator
(3) flashes white.
The headset is searching for a
Bluetooth
®
connection.
•
Open the
Bluetooth
®
settings on your terminal device and wait
until
MyVoice1300
appears in the list of
Bluetooth
®
devices
found.
•
Bluetooth
®
devices found.
•
Select
MyVoice1300
and wait until the headset is listed as
connected in the
Bluetooth
®
settings on your terminal device.
Note –
Bluetooth
®
password
If your terminal device requests a password to establish the
connection, enter
0000
.
Note
If pairing was successful, the
status LED
(3) flashes slowly. A voice
says, ‘Connected’.
•
You can now use the headset.
5.2. Automatic
Bluetooth
®
connection
(after successful pairing)
Note
•
Make sure that your
Bluetooth
®
-capable terminal device is on
and
Bluetooth
®
is activated.
•
For more information, please refer to the operating instructions of
your terminal device.
•
Make sure that the headset is switched on.
•
After the headset and terminal device have been paired, a
connection is established automatically.
•
You can now use the headset.
Note
•
If pairing was successful, the
status LED
(3) flashes slowly. A
voice says, ‘Connected’.
•
It may be necessary to change the settings on your terminal
device to enable it to automatically connect to the paired
headset.