3
4.1 Switching the product on and off
•
Press and hold the function button (1) for about 4
seconds to switch the speaker on or off. An acoustic
signal will sound and the status LED (8) will start
flashing or go off.
Note – Automatic shutdown
Note that the speaker will automatically switch
off after 10 minutes without action (no audio
playback/no
Bluetooth
®
function).
4.2 Charging the battery
Warning – Rechargeable battery
•
Only use suitable charging devices with USB
connections for charging.
•
As a rule, do not use charging devices or USB
connections that are defective and do not try to
repair them yourself.
•
Avoid storing, charging or using batteries in
extreme temperatures.
•
When stored for a long period of time, batteries
should be charged regularly (at least every three
months).
•
Charge the speaker fully before using it for the first
time.
•
Connect the included Micro-USB charging cable to
the speaker’s Micro-USB port (6).
•
Connect the unused connector on the Micro-USB
charging cable to a suitable USB charger. Please refer
to the operating instructions for the USB charger
used.
•
The status LED (8) lights up constantly in red during
the charging process.
•
If the battery is fully charged, the status LED (8) will
go out.
Note – Charging
•
It takes approx. 6-7 hours to completely charge the
product.
•
The speaker’s battery can be charged whether the
speaker is on or off.
•
If the battery capacity is less than 10%, the
speaker will emit two acoustic signals. You will
only receive this information if the speaker is on.
•
The actual battery life varies depending on use of
the device, the settings and the ambient conditions
(rechargeable batteries have a limited service life).
4.3 Audio playback via the included audio cable
(3.5 mm jack)
•
Ensure that the speaker is switched off.
•
Connect your mobile terminal device (MP3 player,
smartphone, etc.) and the AUX input (5) of the
speaker using the included 3.5 mm audio cable.
•
Set the volume on your terminal device to a low level.
•
Switch on the speakers as described in
4.1,
Switching the product on and off.
The status LED
(8) is now green.
•
Start and control audio playback on the connected
terminal device accordingly.
•
Press the function button – (2) to reduce the volume.
•
Press the function (4) to increase the
volume.
•
Press the function button
►
||
(
(3) to mute the
speaker.
Note
Please note that you cannot establish the
Bluetooth
®
connection described under 4.4 and 4.5 if an audio
cable is connected.
Summary of Contents for 00173100
Page 2: ...USB A B C 1 2 3 4 5 7 8 6 ...