Hama 00173100, Operating Instructions Manual

Page: 5 / 93

4
4.4 Bluetooth
®
pairing
Note
• Check whether your mobile device (MP3 player,
mobile phone, etc.) is
Bluetooth
®
capable.
• If not, you can only use the speaker for playback
using the included audio cable.
• Note that the maximum range for
Bluetooth
®
is
10 metres without obstacles such as walls, people,
etc.
• Make sure that your
Bluetooth
®
capable terminal
device is on and
Bluetooth
®
is activated.
• Make sure that the speaker is located within the
Bluetooth
®
range of max. 10 metres.
• Switch on the speakers as described in 4.1
Switching the product on and off.
• The status LED (8) starts to flash in blue. The speaker
searches for a connection.
• Open the
Bluetooth
®
settings on your terminal device
and wait until Hama BLADE appears in the list of
Bluetooth
®
devices found.
• Select Hama BLADE and wait until the speaker is
listed as connected in the
Bluetooth
®
settings on
your terminal device. An acoustic signal confirms that
connection was successful.
• The status LED (8) now remains blue.
Note – Bluetooth
®
password
• Some terminal devices require a password in order
to connect to another
Bluetooth
®
device.
• If your terminal device requests a password for
connection to the speaker, enter 0000.
Note – Connection to a new device
• If you want to connect a new
Bluetooth
®
terminal
device to the speaker, press the function buttons
– (2) and + (4) at the same time until the status
LED (8) begins to flash in blue and an acoustic
signal sounds.
• The current connection is disconnected and the
search for new terminal devices starts.
• The speaker always stores the last eight terminal
devices paired.
• The speaker will automatically connect to the last
terminal device paired when it is switched on the
next time.
4.5 Automatic Bluetooth
®
connection (after
successful pairing)
• Make sure that your
Bluetooth
®
capable terminal
device is on and
Bluetooth
®
is activated.
• Make sure that the speaker is located within the
Bluetooth
®
range of max. 10 metres.
• Switch on the speakers as described in 4.1
Switching the product on and off.
• After successful connection, the status LED (8) will
light up in blue. An acoustic signal confirms that
connection was successful.