Note - Constant battery operation
The device is not intended for constant battery operation. This can lead to irreparable damage.
7.2. Switching on/off
Note - Automatic switching on/off
If the Dashcam is connected to a power source by means of the vehicle charger, it automatically
switches on/off when the vehicle is started/switched off.
Note - Car battery
With some vehicles, it can happen that power continues to be supplied even though the ignition
has been switched off. In this case, switch off the camera manually to protect your car battery from
discharge.
Press and hold Power [ ] (10) for about 3 seconds to manually switch on/off the Dashcam.
7.3. Inserting a microSD card
•
Insert a microSD card into the microSD card slot (2) on the Dashcam.
•
is shown on the display.
Note - Memory card full
Once the memory of the microSD card is full, the oldest video recording will be overwritten.
8. Modes
8.1 Video mode
•
After switching on, the camera is in Video operating mode.
appears at the upper-left edge of
the screen.
•
Press [
OK
] (7) to start/stop video recording.
•
The recording duration is displayed at the upper-left edge of the screen. The status LED (12)
alternates between red and blue.
Note - Automatic start of video recording
Activate
Automatic video
mode as described in Section
9.7 Automatic video
to automatically
start video recording after the camera has been switched on.
8
Summary of Contents for 00136697
Page 2: ...3 1 2 4 5 6 7 8 9 10 A B...
Page 3: ...11 12 13 15 14 C D...
