2
G
Operating instructions
Thank you for choosing a Hama product.
Take your time and read the following instructions
and information completely. Keep these operating
instructions in a safe place for future reference.
1. Explanation of Warning Symbols and Notes
Warning
•
This symbol is used to indicate safety instructions or
to draw your attention to specific hazards and risks.
Note
•
This symbol is used to indicate additional information
or important notes.
2. Extent of Delivery
•
USB 3.0 Flash Drive „Canny“
3. Safety Instructions
•
The product is intended for private, non-commercial
use only.
•
Protect the product from dirt, moisture and overheating,
and only use it in a dry environment.
•
Do not use the product in the immediate vicinity of
heaters or other heat sources or in direct sunlight.
•
Do not drop the product and do not expose it to any
major shocks.
•
Do not attempt to service or repair the product yourself.
Leave any and all service work to qualified experts.
•
Do not open the device or continue to operate it if it
becomes damaged.
•
Dispose of packaging material immediately according to
locally applicable regulations.
•
Do not modify the product in any way. Doing so voids
the warranty.
•
Keep this product, as all electrical products, out of the
reach of children!
4. System Requirements
Note
•
Make sure that your end device is host-/OTG-capable.
•
An accurate function can only be guaranteed with
the file format FAT32/exFAT (from 64 GB).
•
Observe the notes in the operating instructions of
your end device.
Warning
•
Never use the USB Type A and microUSB Type B plug
at the same time.
The Hama FlashPen “Canny” supports the following
operating systems:
•
USB Type A:
Windows 10/8/7/Vista/XP
Mac OS 9.x or higher
•
microUSB Type B:
Android 4.0 or higher
5. Product Features
The product supports the following capacities:
•
16 GB, 32 GB, 64 GB
Note – Compatibility USB 2.0 and USB 1.1
•
The Hama FlashPen “Canny” is backwards compatible
to USB 2.0 and USB 1.1.
•
No additional drivers are needed. The installation
runs automatically.
Note – USB 3.0
•
For running the FlashPen with USB 3.0, your end
device must have a USB 3.0 interface and an
accurate installed USB 3.0 driver.
•
The installation runs automatically too.
Note – Android
•
On Android devices you need a file manager app to
access the data on the storage. If such an app is not
installed on your device you can download it via one
of the download portals for Android apps.
•
If your end device is Host/OTG compatible and owns
the necessary software version but still does not
recognize the FlashPen you maybe have to download
and install an additional plug-in app via one of the
download portals for Android apps.
