13
14
- Select the headset and follow the remaining instructions in the phone or in the operating instructions of the
phone.
- If you are asked for the passkey or PIN, confi rm this by entering 0000.
- Pairing is now complete. The LED fl ashes 3x in quick succession, thus indicating that it is ready for operation
(standby). The headset is now ready for operation and can be used.
If the pairing procedure is not completed within 1 minute of starting the process, a deep tone sounds in the headset
as an audible error message. Pairing must then be started again!
Use/call management
Answering calls
You can answer incoming calls using the headset. Incoming calls are signalled audibly in the headset. Press the
“MFB” button – the call is accepted.
Ending calls
Calls can be ended by pressing the “MFB” button.
Making calls
Ensure that your headset is “connected” to the telephone. Calls are made as usual, with the exception that the
headset is used to make the call.
Making calls using voice dialling
To make calls using voice dialling, the corresponding voice profi les must be set up/stored in your phone. Your
telephone must also support this function in Bluetooth mode (hands-free profi les only). For more information,
please refer to the operating instructions of your mobile phone. Voice dialling using the headset operates in the
same manner as if you were making a call using the phone. The only difference is that voice dialling is activated
using the headset, not the phone!
- Press the “MFB” button.
- A brief sound indicates that voice dialling has been activated.
- Say the correct name or the voice profi le of the person you wish to call.
- The call will be made.
Redialling the number last dialled (not supported by all telephones)
To redial the last number dialled, press the „MFB“ for 2 seconds – the last number dialled is activated and the call is
made.
Rejecting calls (hands-free profi les only)
Press the „MFB“ button to reject incoming calls. Press the “MFB” until a long tone sounds in the headset – the call
is rejected.
Transferring calls (hands-free profi les only)
Press and hold the “” button and the “MFB” button to transfer calls from the headset to the mobile phone and from
the mobile phone to the headset during a call. Then press the two buttons simultaneously until a beep sounds in the headset
– the call is transferred to the telephone or the headset. Also follow any operating instructions for your mobile phone!
00087510bda.indd Abs2:13-Abs2:14
00087510bda.indd Abs2:13-Abs2:14
06.03.2007 15:11:15 Uhr
06.03.2007 15:11:15 Uhr
